Skip to content
Home » How to turn on 2.4GHz Wifi on Xfinity Router- An Ultimate Guide

How to turn on 2.4GHz Wifi on Xfinity Router- An Ultimate Guide

wifi on Xfinity router

How to turn on 2.4GHz Wifi on Xfinity router?” I guess you’re at that point where I was some time ago. Now that I’m pretty much familiar with routers and most importantly Xfinity, let’s get your 2.4GHz band on.

how to turn on 2.4GHz wifi on Xfinity router

You’re not alone if you’re having difficulty turning on the 2.4 GHz Wifi on your Xfinity router. Fortunately, it doesn’t have to be a daunting task. This guide will provide you with step-by-step instructions for turning on your 2.4 GHz Wifi and boosting your internet speed in just a few clicks.

Introduction to Xfinity Router 2.4 GHz Wifi.

Before learning how to turn on the 2.4GHz Wifi band, I’d like to give you some information on why you need the 2.4GHz Xfinity Wifi.

Xfinity routers offer both 2.4 GHz and 5 GHz Wifi frequencies. The former runs on a lower frequency band and offers a wider range, making it suitable for large homes or workplaces with many obstructions like walls and doors.

 The 2.4GHz band is a wireless frequency band that is commonly used for Wi-Fi networks. By turning on the 2.4GHz band on your Xfinity network, you can potentially improve the range and coverage of your Wi-Fi network. This is because the 2.4GHz band has a longer wavelength than the 5GHz band, which means it can travel through walls and other obstacles more easily.

Additionally, some older devices may only be compatible with the 2.4GHz band, so turning it on can ensure that these devices can still connect to your network. However, it’s important to note that the 2.4GHz band can be more congested than the 5GHz band, which can result in slower speeds and potential interference from other devices using the same frequency.

This guide will show you how to do just that in a few simple steps, so you can start enjoying smoother streaming, browsing, and downloading experiences today.

Click here to learn the complete difference between a 2.4GHz and 5GHz wifi band.

Read Also:

Best Wifi Extender For Xfinity-Top 5 Picks!

What Is The WPS Button On Xfinity Router And How To Use It?

6 Reasons why Xfinity Modem Blinking green – Compatible Gear

How to turn on 2.4 GHz Wifi on Xfinity Router

Now, let’s get back on point and look at how you can turn on the 2.4GHz Wifi on Xfinity router.

Connect to your Xfinity Router

To turn on the 2.4GHz Wifi band on your Xfinity router, you need to connect your computer or mobile device to the router’s Wifi network. To do this, follow these steps:

  1. Turn on your computer or mobile device and make sure it’s connected to your Xfinity router’s Wifi network. You can do this by checking the list of available Wifi networks on your device and selecting the one that matches your Xfinity router’s network name (SSID).
  • If you haven’t changed your router’s default network name and password, they should be printed on a label at the bottom or back of the router. Alternatively, you can also find the network name and password on the Xfinity app or website.
  • Enter the network password when prompted and wait for your device to connect to the router’s Wifi network.

Access your router’s control panel.

How to turn on 2.4GHz Wifi on Xfinity router?

To turn on the 2.4 GHz Wifi on your Xfinity router, you will need to access your router’s control panel. You can do this by opening a web browser and typing “” in the address bar or by navigating to “”. If prompted, enter your login credentials, which should be provided by your internet service provider or set up during installation.

 Once you are logged in, look for the “Wireless” or “Wifi” settings section and select the option to enable 2.4 GHz Wifi.

 Follow any additional prompts or instructions provided by the router’s interface to save and apply your changes, then test your connection to see if it has improved.

Connecting to the 2.4GHz network

If you’re looking to select the 2.4 GHz network on your Xfinity router, first make sure that it is enabled by logging into your router’s control panel as mentioned earlier. Once you have verified that the 2.4 GHz Wifi is turned on, locate the list of available networks in your device’s Wifi settings.

The name of your 2.4 GHz network should appear in this list alongside any other available networks in range. Click or tap on the name of the 2.4 GHz network to select it and enter the password for that network when prompted.

Once connected, you should start experiencing improved internet coverage and connectivity on your device.

Test Your Wifi Signal

After turning on the 2.4GHz Wifi band on your Xfinity router, you should test your Wifi signal to see if there’s any improvement in range or strength. Here are some tips on how to test your Wifi signal:

  1. Move around your home or office and check if you can still connect to the Wifi network. If you previously had trouble connecting in certain areas, see if the 2.4GHz band has improved your connection in those areas.
  2. Use a Wifi analyzer app on your mobile device to check the strength and quality of your Wifi signal. These apps can show you the signal strength of each Wifi band and identify any interference or congestion issues.
  3. Use a speed test website or app to check your internet speed before and after turning on the 2.4GHz Wifi band. If there’s a significant improvement in speed, it could be an indication that the 2.4GHz band has improved your overall Wifi performance.

Optimize Your Xfinity Wifi Settings

Now that you’ve turned on the 2.4GHz Wifi band on your Xfinity router, you may want to optimize your Wifi settings to get the best possible performance. Here are some tips on how to optimize your Wifi settings:

  1. Change the Wifi channel: If you’re experiencing interference or congestion on your Wifi network, changing the Wifi channel can help reduce the interference and improve your connection. You can change the Wifi channel from your router’s admin panel.
  2. Enable Wifi security: Make sure your Wifi network is secured with a strong password to prevent unauthorized access and protect your personal data.
  3. Upgrade your router: If your router is old or outdated, upgrading to a new router with better Wifi capabilities can improve your overall Wifi performance and provide better coverage and speed.
  4. Position your router correctly: The location of your router can have a big impact on its Wifi coverage and performance. Make sure your router is placed in a central location, away from walls and obstructions, and positioned at a height that allows for better coverage.

That’s pretty much it. By following the steps outlined in this article, you can easily turn on the 2.4GHz Wifi band on your Xfinity router and optimize your Wifi settings for the best possible performance.