Eero homes are wonderful. They are fast, stable, and easy to set up. But they have some downsides too. First of all, Eero is offering only three models of Wi-Fi routers so far – with the same hardware in each one. Sometimes users need more gigabit ports. But even if you have three Eeros in your house, there is only one Ethernet port on each router, so you need some switch or router with multiple ports.
On the market, you can find tons of dedicated ethernet switches, but what is the best one for Eero? In this article, we compare two different models from TP-LINK and ASUS.
According to eero officials, unmanaged types of ethernet switches perform better with Amazon eero mesh. They have also said “The speed will be restricted solely by any device that would impede the eero’s ability to transmit and receive data. Any switch should do fine; just ensure it is unmanaged..”
Also, there is a single question rumbling in your mind which is about using a smart switch with eero. Yes, it’s possible to use a managed switch with your eero mesh but tech supporter doesn’t recommend it due to being unable to change setting in a smart switch which possibly can create different chaos while using the internet.
5 Gigabit Ethernet Switch For eero
The TP-Link TL-SG108 Network Switch provides the speed, performance, and reliability required to help your home network keep up with today’s technology.
The TL-SG108 provides eight Gigabit ports that deliver transfer speeds 10 times faster than standard 100 Mbit/s Ethernet connections. This high performance allows users to connect multiple devices using a single network and eliminates the bottlenecks caused by heavy traffic and crowded networks.
With its plug-and-play design, there is no need to worry about complicated configurations or installation procedures. Simply connect your devices to the switch using your existing network cables, and experience a significant increase in network speeds.
With no external power adapter, the TL-SG108 consumes only 0.1 W of power when acting as a link between your network and connected devices. This technology reduces energy costs, heat generation, and carbon emissions all without sacrificing performance or functionality.
The GS308 delivers powerful performance and intelligent switching for growing networks. Strength through speed with 8 Gigabit Ethernet ports that provide up to 2000 Mbps of dedicated bandwidth, enabling smooth HD streaming and gameplay in a high-speed local area network (LAN).
This sturdy switch is compact in size, so it won’t block other adjacent outlets, while the built-in cable management secures and organizes Ethernet cables for a clean and clutter-free setup.
This switch is designed to provide uninterrupted, reliable network connectivity with features such as silent operation and desktop or wall mount form factor so you can place it out of the way if desired.
Additionally, the GS308 includes NETGEAR Green features, which provide energy savings, reduced power consumption, and a longer product life without sacrificing performance or functionality.
The GS308 is ideal for use at home as a cost-effective way to make your wired network faster and more reliable or in the office as an easy way to migrate to Gigabit Ethernet.
The NETGEAR GS308PP is a very popular 8-Port Gigabit PoE+ Switch with total PoE power of 83 Watts. It comes with 8 Ports, all featuring the latest energy-efficient technology. With a concise desktop design, includes an internal power supply unit for universal 100 – 240 VAC at 50 / 60 Hz input voltage.
NETGEAR GS308PP is the best choice for a business that needs a high-performance, unmanaged switch to power multiple PoE devices including IP cameras. GS308PP has 8 Ethernet auto-sensing 10/100/1000 Mbps ports with 8 PoE+ ports, which provide up to 10.5 W per port. With a total power of 83W, GS308PP is the best ethernet switch for your eero mesh.
The plug-and-play GS308PP provides your business with a smart, reliable, and easy to use Ethernet access solution for workgroups needing network connectivity. This desktop/wall mount switch offers the performance you need to support mission-critical applications in a fanless design.
This is one of the cheapest gigabit Ethernet switches with 16 ports that I could find on the market. It’s quite big, well-built, and apparently fanless thanks to its metal housing. The specs are also pretty good: 16 (10/100/1000Mbps) RJ45 Ethernet Ports with auto-sensing technology to detect connected devices for optimum speed 24Gbps switching capacity.
Wire-speed switching with full/half-duplex support for speeds up to 1Gbps – Supports IEEE 802.3x flow control for Full-Duplex Mode and backpressure for Half-Duplex mode – Supports IEEE 802.1p QoS for traffic prioritization, packet filtering based on MAC address, IP address, TCP/UDP port.
Supports Auto Uplink (Auto MDI/MDIX) feature for all ports – Supports Full-duplex Ethernet on 10/100Mbps connections and Backpressure Routing on 1Gbps connections. 5K Jumbo frame – Latency of less than 100ns @10% Busy – Store-and-Forward switching architecture – Auto-negotiation for each port – Comes with metal strap and Limited lifetime warranty
If you are looking for a cheap ethernet switch, our Cisco CBS110-16T is your best choice. It was tested to work excellent by customers like you!
Each Cisco CBS110-16T Unmanaged Switch is loaded with 8 ports of 10/100/1000Mbps + 8ports 1000M SFP slot. The unmanaged switch with a limited lifetime warranty provides the ideal combination of value and investment protection for growing networks.
This Cisco Business CBS110-16T Unmanaged Switch is a quick and easy solution to your networking needs, with eight auto-sensing 10/100/1000 ports which allow you to connect devices such as desktop PCs, servers, and hubs or switches. Besides, this switch is ideal for connections to servers or hubs in small office or workgroup environments.
A sleek, compact design is ideal for small spaces. Power-sourcing equipment (PSE) support with up to 70W per port reduces cabling requirements and saves cost without compromising performance.
Five 10/100/1000 Mbps Auto-Negotiation RJ45 ports and one Gigabit SFP slot for fiber connectivity. 1 Gigabit SFP slot for fiber connectivity.
With energy-saving functions, the fanless design ensures quiet operations and extends product life without compromising on performance.
QoS & IGMP Snooping to enhance network performance and guarantee QoS for bandwidth-sensitive applications such as voice and video.
Passive 24V Power over Ethernet (pairs 4, 5+; 7, 8 return) allows connection to a non-PoE network device such as an IP camera or wireless access point in a cost-effective way.
The TL-SG1005P is easy to install and use. Auto features make configuration plug-and-play hassle-free while management features enable seamless access from a central location.
The TL-SG1005P is a low-cost L2-managed switch which fully compatible with IEEE 802.3/802.3u standards and complies with the Universal Power over Ethernet (UPOE) technology to provide network power to IP Phone / Intranet / Network Camera etc without extra power cost.
We are living in a wireless era but that doesn’t make wired connection less important. Where you can get a direct gigabit internet connection through just an ethernet-wired cable to your desired device, there why would even people put their effort into their existing devices to get bandwidth wirelessly? Amazon eero mesh users can also obtain high-speed gigabit bandwidth by using an ethernet switch where users do not bound up with any kinda limitation of connecting devices using an ethernet cable.